Designed to transfer a signal to the turnstile managing controller to unlock the turnstile during evacuation.
It has LED indication of operation status.
The managing automation controller UCM-1A is designed to transfer a signal to the turnstile managing controller to unlock the turnstile during people evacuation.
It has LED indication of operation status.
UCM-1A has two control modes:
• automatic mode - unblocking of turnstiles for people’s evacuation occurs from a command signal received from automatic fire alarm or fire extinguishing installations.
• semi-automatic mode (manual) - unblocking turnstiles for people’s evacuation must be provided by the dispatcher (responsible person) upon receipt of a command signal from automatic fire alarm or fire extinguishing installations.
Controller is equipped with:
• 1 socket for the Ethernet network connection;
• 1 power connector 220V; 2-pin plug-in terminal block with 3.81mm pitch for evacuation system (fire) connection.
| Parameter name | Value |
|
AC supply voltage, V | 230 |
|
Consumption current maximum*, A | 5 |
|
Interfaces for communication with Smart turnstiles for communication with the fire alarm system | Ethernet "Dry contacts" |
|
Overall dimensions, l/w/h, mm | 485/165/44 |
|
Weight, not less than, kg | 0,3 |
*Parameter may vary depending on modification.
We, as manufacturers, reserve the right to make changes to the design of the device (including changes in overall dimensions), without being reflected in the technical data sheet, which do not reduce the consumer properties and do not impair the quality of the device.
